Technical Information
“Fitting the correct Residual Current Device (RCD) when fitting new appliances”
Advice notice from the BPMA
The majority of homes in the UK have type “AC...
Continue Reading
Category: Technical Information
ATEX 94/9/EC ( EXPLOSIVE ATMOSPHERES )
ATEX 94/9/EC ( EXPLOSIVE ATMOSPHERES )
A new 23 page EC Guidance document on the transition from the ATEX Directive 94/9/EC to Directive 2014/34/EU is now available. This document consists of a detailed FAQ section covering both...
Continue Reading
Category: Technical Information
Improvement of Reliability of Pumps by Condition Monitoring Consequences
Improvement of Reliability of Pumps by Condition Monitoring Consequences For MTBR/MTBFAn effective pump Condition Monitoring System(CMS) should ...
Continue Reading
Category: Technical Information
Europump position paper on the review of “Regulation (EU) No 547/2012”
SEPTEMBER 2015Europump position paper on the review of “Regulation (EU) No 547/2012”Europump have been keen supporters of the European Commission in actively bringing into focus legislation concerning energy,...
Continue Reading
Category: Technical Information
Guideline on the application of COMMISSION REGULATION 641/2009 /EC and the amendment 622/2012/EUwith regard to ecodesign requirements for circulators
Guideline on the application of COMMISSION REGULATION 641/2009 /EC and the amendment 622/2012/EUwith regard to ecodesign requirements for circulators
IntroductionCommission Regulation (EC) 641/2009 and its...
Continue Reading
Category: Technical Information
BUILDING INFORMATION MODELLING (BIM)
BUILDING INFORMATION MODELLING (BIM) - A Europump Guide
The Pump industry has investigated the current requirements from the construction industry to achieve BIM Level 2 acceptance. The conclusion was to develop a...
Continue Reading
Category: Technical Information
PUMP VIBRATION STANDARDS GUIDELINES
PUMP VIBRATION STANDARDS - A Europump Guide
The diversity of standards applicable to the pump industry is probably greater on the subject of vibration than any other field. These standards can appear to be...
Continue Reading
Category: Technical Information
EXTENDED PRODUCT APPROACH FOR PUMPS
EXTENDED PRODUCT APPROACH FOR PUMPS - A Europump Guide
Guideline on the application of Commission Regulation 641/2009/EC and the amendment 622/2012/EC with regard to eco design requirements for circulators
...
Continue Reading
Category: Technical Information
1.png&w=170&h=170 "John Crane UK Ltd"){kind=logo}
3.png&w=170&h=170 "AVT Pumps")
2.jpg&w=170&h=170 "Stuart Turner"){kind=logo}
